8-15 Slipform Paver

8-15 Slipform Paver
Brand Hem Paving
Category Slipform Paver

Turbocharged Diesel Engine –
170hp (126.77 kW) Tier III enclosed engine compartment engine sound proofing

Hydraulic Oil Reservoir
164 gallon (624.59 liter)

Fuel Reservoir
60 gallon (227.12 liter)

1 Hydraulic System Heat Exchangers
with electric fan

6 Hydraulic Vibrators

  • vertical adjustment controlled from operator platform
  • individual or en-masse vibrator speed controls
  • automatic shut-off with machine travel
  • maximum flow 4 gallon (15.14 liter) per minute
  • normal operating pressure 800 – 1300 psi

6 Hydraulic Vibrator Circuits

  • with individual variable controls
  • pressure compensated

Hydraulic Pump System(

  • (2)quad stage hydraulic pumps
  • (1)pressure relief manifold for convenient pressure monitoring and pressure adjustments

Two Crawler Tracks

  • length: 11 ft. 11 inches (3.63 m)
  • width: 12 inches (30 cm) 6 inch (30 cm) pitch – triple grouser shoes
  • 49:1 gear reduction
  • sealed, lifetime lubricated rollers

8 ft – 15 ft (2.43 m – 4.57 m) Paving Width by 6 inch (15 cm) increments

  • 8 ft. (2.43 m) main frame (minimum width)
  • bolt-together sections to allow for paving 8 ft. – 15 ft. (2.43 m – 4.57 m) by 6 inch (15 cm) increments 3/8 inch thick x 18 inch high x 42 inch long (9 mm thick x 45 cm high x 107 cm long)
  • curb mold inserts for right and/or left side
  • 8 inch (20.3 cm) trailing pan extensions with vertical stabilizers at 1 ft. (30.5 cm) intervals for fine adjustment and rigidity

Hydraulically Powered Split Tamper Bar System

  • adjustable tamping depth
  • variable speed
  • double bar system

Hydraulically Adjustable Side Forms

  • 6 way hydraulic adjustment
  • split 30 inch (76 cm) high side forms – folding inward for transport
  • side forms attach to the main frame of the machine, not tracks
  • 18 inch (45 cm) vertical stroke, 4 inch (10 cm) horizontal stroke
  • adjustable edge slump control
  • hydraulically controlled from ground and operators platform

Spreader Auger System

  • 16 inch (41 cm) diameter, split reversible, heavy duty augers, variable speed
  • planetary drives
  • augers are adjustable for height
  • augers drives are shielded from wet concrete
  • quick disconnect for width changes

Hydraulic Strike-Off

  • hydraulically controlled strike-off plates
  • individual controls for variable crown paving

Grade Control System

  • 4 hydraulic stringline sensors
  • automatic and manual control from operator’s platform
  • system works with two string lines, or “lock to grade”

Steering System

  • 1 hydraulic stringline sensor
  • steer from right or left hand side of machine
  • automatic and manual steering, controlled from operator’s platform

Power Wash System

  • 110 gallon (416 cm) water tanks
  • 2000 psi, 4 gallon (15 liter) per minute hydraulic power wash pump
  • 25 ft (7.6 m) high pressure hose and wand

Intermittent Shut-Down System

  • single switch operation
  • electronic over hydraulic
  • controls all critical functions of machine:
    grade, travel, tamper, vibration, belt finisher

Operator’s Platform

  • hydraulic system pressure gauges: grade, travel, vibrator, tamper, auger
  • hydraulic controls: travel, vibrator, tamper, pressure wash, strike-off, auger, grade
  • high visibility “wrap around” console
  • engine controls and monitoring devices mounted on console
  • safety railing
  • engineered for easy monitoring of all machine functions
  • canopy

Transport Dimensions

  • width: 11 ft. 11 inch (3.63 m)
  • length: paving width plus 4 ft. (121 cm), 2 ft. (60 cm) each side for track and end frame
  • base machine weight – (8 ft. / 2.43 m): 36,600 lbs. (16636 kg)
  • full width weight – (15 ft. / 4.57m): 40,500 lbs. (18409 kg)

Other Hem Paving Products

Hem Paving

3-Wheel Concrete Breaker

Hem Paving

Cure Cart

Hem Paving

14-40 Placer Spreader

Hem Paving

MP2500 Placer

Other Slipform Paver Products

Hem Paving

10-17 Slipform Paver

Hem Paving

12-27 Slipform Paver

Hem Paving

14-37 Slipform Paver