Turbocharged Diesel Engine –
325 hp (250 kW) Tier III enclosed engine compartment engine sound proofing

Hydraulic Oil Reservoir
231 gallon (874 liter)

Fuel Reservoir
148 gallon (560 liter)

2 Hydraulic System Heat Exchangers
with electric fan

20 Hydraulic Vibrators

• vertical adjustment controlled from operator platform
• individual or en-masse vibrator speed controls
• automatic shut-off with machine travel
• maximum flow 4 gallon (15.14 liter) per minute
• normal operating pressure 800 – 1300 psi

20 Hydraulic Vibrator Circuits

• with individual variable controls
• pressure compensated
• Hydraulic Pump System
• (3)triple stage hydraulic pumps
• one pressure relief manifold for convenient pressure
• monitoring and pressure adjustments

Two Crawler Tracks

• length: 14 ft (4.27 m)
• width: 14 inches (35.56 cm)
• 6 inch (15.2 cm) pitch – triple grouser shoes
• 101:1 gear reduction
• sealed, lifetime lubricated rollers

14 ft – 37 ft (4.26 m – 11.27 m) Paving Width

• 14 ft (4.26 m) main frame (minimum width)
• additional paving width to 45 ft (13.72 m) is optional

Paving Pans

• bolt-together sections to fit any slab 14 ft – 37 ft
• (4.26 m – 11.27 m) by 6 inch (15 cm) increments
• 3/8 inch thick x 18 inch high x 52 inch long
• (9 mm thick x 45 cm high x 132 cm long)
• power crown “on-the-go” for uninterrupted paving through transitions and intersections
  tampers and vibrator rack follow vertical movement of pans
• hydraulic power crown controlled from operator console
• crown gauge indicator
• curb mold inserts for right and/or left side
• 8 inch (20.3 cm) trailing pan extensions with vertical stabilizers at 1 foot (30.5 cm) intervals for fine adjustment and rigidity

Hydraulically Powered Split Tamper Bar System

• adjustable tamping depth
• variable speed
• double bar system

Hydraulically Adjustable Side Forms

• 6 way hydraulic adjustment
• split 30 inch (76 cm) high side forms – folding inward for transport
• side forms attach to the main frame of the machine, not tracks
• 18 inch (45 cm) vertical stroke, 4 inch (10 cm) horizontal stroke
• adjustable edge slump control
• hydraulically controlled from ground and operators platform

Spreader Auger System

• 16 inch (41 cm) diameter, split reversible, heavy duty augers, variable speed
• planetary drives
• augers are adjustable for height
• augers drives are shielded from wet concrete
• quick disconnect for width changes

Hydraulic Strike-Off

• hydraulically controlled strike-off plates
• individual controls for variable crown paving

Grade Control System

• 4 hydraulic stringline sensors
• automatic and manual control from operator’s platform
• system works with two string lines, or “lock to grade”

Steering System

• 1 hydraulic stringline sensor
• steer from right or left hand side of machine
• automatic and manual steering, controlled from operator’s platform

Power Wash System

• (2)110 gallon (416 liter) water tanks
• 2000 psi, 4 gallon (15 liter) per minute hydraulic power wash pump
• 25 ft (7.6 m) high pressure hose and wand

Intermittent Shut-Down System

• single switch operation
• electronic over hydraulic
• controls all critical functions of machine:
  grade, travel, tamper, vibration, belt finisher

Operator’s Platform

• hydraulic system pressure gauges: grade, travel, vibrator, tamper, auger
• hydraulic controls: travel, vibrator, tamper, pressure wash, strike-off, auger, grade
• high visibility “wrap around” console
• engine controls and monitoring devices mounted on console
• safety railing
• engineered for easy monitoring of all machine functions
• canopy

Transport Dimensions

• width: 14 ft (4.26 m)
• length: paving width plus 4 ft (1.2 m)
• 2 ft (60 cm) each side for track and end frame