
Turbocharged Diesel Engine –
240 hp (179 kW) Tier III enclosed engine compartment engine sound proofing
Hydraulic Oil Reservoir
211 gallon (798 liter)
Fuel Reservoir
116 gallon (440 liter)
2 Hydraulic System Heat Exchangers
with electric fan
16 Hydraulic Vibrators
- vertical adjustment controlled from operator platform
- individual or en-masse vibrator speed controls
- automatic shut-off with machine travel
- maximum flow 4 gallon (15.14 liter) per minute
- normal operating pressure 800 – 1300 psi
16 Hydraulic Vibrator Circuits
- with individual variable controls
- pressure compensated
Hydraulic Pump System(
- (2)triple stage hydraulic pumps
- (1)double stage hydraulic pump
- one pressure relief manifold for convenient
- pressure monitoring and pressure adjustments
Two Crawler Tracks
- length: 11 ft. 11 inches (3.65 m)
- width: 12 inches (30 cm)
- 6 inch (15.2 cm) pitch – triple grouser shoes
- 101:1 gear reduction
- sealed, lifetime lubricated rollers
12 ft – 27 ft (3.65 m – 8.2 m) Paving Width
- 6 inch (15 cm) increments
- 12 ft. (3.65 m) main frame (minimum width)
- additional paving width to 35 ft. (10.67 m) is optional
Paving Pans
- bolt-together sections to allow for paving
- 12 ft. – 27 ft. (3.65 m – 8.2 m) by 6 inch (15 cm) increments
- 3/8 inch thick x 18 inch high x 52 inch long
- (9 mm thick x 45 cm high x 132 cm long)
- power crown “on-the-go” for uninterrupted paving through transitions and intersections
- tampers and vibrator rack follow vertical movement of pans
- hydraulic power crown controlled from operator console
- crown gauge indicator
- curb mold inserts for right and/or left side
- 8 inch (20.3 cm) trailing pan extensions with vertical stabilizers at 1 foot (30.5 cm) intervals for fine adjustment and rigidity
Hydraulically Powered Split Tamper Bar System
- adjustable tamping depth
- variable speed
- double bar system
Hydraulically Adjustable Side Forms
- 6 way hydraulic adjustment
- split 30 inch (76 cm) high side forms – folding inward for transport
- side forms attach to the main frame of the machine, not tracks
- 18 inch (45 cm) vertical stroke, 4 inch (10 cm) horizontal stroke
- adjustable edge slump control
- hydraulically controlled from ground and operators platform
Spreader Auger System
- 16 inch (41 cm) diameter, split reversible, heavy duty augers, variable speed
- planetary drives
- augers are adjustable for height
- augers drives are shielded from wet concrete
- quick disconnect for width changes
Hydraulic Strike-Off
- hydraulically controlled strike-off plates
- individual controls for variable crown paving
Grade Control System
- 4 hydraulic stringline sensors
- automatic and manual control from operator’s platform
- system works with two string lines, or “lock to grade”
Steering System
- 1 hydraulic stringline sensor
- steer from right or left hand side of machine
- automatic and manual steering, controlled from operator’s platform
Power Wash System
- (2)110 gallon (416 liter) water tanks
- 2000 psi, 4 gallon (15 liter) per minute hydraulic power wash pump
- 25 ft (7.6 m) high pressure hose and wand
Intermittent Shut-Down System
- single switch operation
- electronic over hydraulic
- controls all critical functions of machine:
grade, travel, tamper, vibration, belt finisher
Operator’s Platform
- hydraulic system pressure gauges: grade, travel, vibrator, tamper, auger
- hydraulic controls: travel, vibrator, tamper, pressure wash, strike-off, auger, grade
- high visibility “wrap around” console
- engine controls and monitoring devices mounted on console
- safety railing
- engineered for easy monitoring of all machine functions
- canopy