10-17 Slipform Paver

10-17 Slipform Paver
Brand Hem Paving
Category Slipform Paver

Turbocharged Diesel Engine –
185 hp (137.95 kW) Tier III enclosed engine compartment engine sound proofing

Hydraulic Oil Reservoir
205 gallon (775 liter)

Fuel Reservoir
95 gallon (359 liter)

1 Hydraulic System Heat Exchangers
with electric fan

8 Hydraulic Vibrators

  • vertical adjustment controlled from operator platform
  • individual or en-masse vibrator speed controls
  • automatic shut-off with machine travel
  • maximum flow 4 gallon (15.14 liter) per minute
  • normal operating pressure 800 – 1300 psi

8 Hydraulic Vibrator Circuits

  • with individual variable controls
  • pressure compensated

Hydraulic Pump System(

  • (2)quad stage hydraulic pumps
  • pressure relief manifold for convenient pressure monitoring and pressure adjustments

Two Crawler Tracks

  • length: 11 ft. 11 inches (3.65 m)
  • width: 12 inches (30 cm) 6 inch (15.2 cm) pitch – triple grouser shoes
  • 49:1 gear reduction
  • sealed, lifetime lubricated rollers

10 ft – 17 ft (3 m – 5.5 m) Paving Width

  • 6 inch (15 cm) increments
  • 10 ft. (3 m) main frame (minimum width)
  • additional paving width to 21 ft. (6.4 m) is optional

Paving Pans

  • bolt-together sections to allow for paving
  • 10 ft. – 17 ft. (3.05 m – 5.18 m) by 6 inch (15 cm) increments
  • 3/8 inch thick x 18 inch high x 52 inch long
  • (9 mm thick x 45 cm high x 106.68 cm long)
  • curb mold inserts for right and/or left side
  • 8 inch (20 cm) long trailing profile pans for fine adjustment and rigidity

Hydraulically Powered Split Tamper Bar System

  • adjustable tamping depth
  • variable speed
  • double bar system

Hydraulically Adjustable Side Forms

  • 6 way hydraulic adjustment
  • split 30 inch (76 cm) high side forms – folding inward for transport
  • side forms attach to the main frame of the machine, not tracks
  • 18 inch (45 cm) vertical stroke, 4 inch (10 cm) horizontal stroke
  • adjustable edge slump control
  • hydraulically controlled from ground and operators platform

Spreader Auger System

  • 16 inch (41 cm) diameter, split reversible, heavy duty augers, variable speed
  • planetary drives
  • augers are adjustable for height
  • augers drives are shielded from wet concrete
  • quick disconnect for width changes

Hydraulic Strike-Off

  • hydraulically controlled strike-off plates
  • individual controls for variable crown paving

Grade Control System

  • 4 hydraulic stringline sensors
  • automatic and manual control from operator’s platform
  • system works with two string lines, or “lock to grade”

Steering System

  • 1 hydraulic stringline sensor
  • steer from right or left hand side of machine
  • automatic and manual steering, controlled from operator’s platform

Power Wash System

  • 110 gallon (416 cm) water tanks
  • 2000 psi, 4 gallon (15 liter) per minute hydraulic power wash pump
  • 25 ft (7.6 m) high pressure hose and wand

Intermittent Shut-Down System

  • single switch operation
  • electronic over hydraulic
  • controls all critical functions of machine:
    grade, travel, tamper, vibration, belt finisher

Operator’s Platform

  • hydraulic system pressure gauges: grade, travel, vibrator, tamper, auger
  • hydraulic controls: travel, vibrator, tamper, pressure wash, strike-off, auger, grade
  • high visibility “wrap around” console
  • engine controls and monitoring devices mounted on console
  • safety railing
  • engineered for easy monitoring of all machine functions
  • canopy

Other Hem Paving Products

Hem Paving

3-Wheel Concrete Breaker

Hem Paving

Cure Cart

Hem Paving

14-40 Placer Spreader

Hem Paving

MP2500 Placer

Other Slipform Paver Products

Hem Paving

12-27 Slipform Paver

Hem Paving

14-37 Slipform Paver

Hem Paving

8-15 Slipform Paver